Dunster House G3-1824HPB Panduan Instalasi - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Rumah Taman Dunster House G3-1824HPB. Dunster House G3-1824HPB 18 halaman. Hangover pent bar 1.8m x 2.4m
G3-1824HPB - Hangover Pent Bar - Assembly Steps
STEP 9: PANEL JOINT TRIM & DRIP TRAY
Items:
10x 35mm Screws
1x ST-PT19451855
1x ST-PT2023800 (Drip Tray)
Fix 1x ST-PT19451855 over the joint ensuring the
distance between the joint and edge of the trim is the
same.
Using 8x 35mm Screw.
Side View
Shiplap
Drip tray
35mm SCREW
** Pre-drill parts before fixing screws **
SCREW 35 mm
Principle of drip tray installation
Position the drip tray to the correct position as shown in the diagram
below. Keep same overhang of drip tray on each side of the door.
Fix the drip tray into the front wall frame (represented by dashed
Front panel frame
lines) by using 2x 35mm screws.
Front View
Drip tray
Approx. 60mm
CONGRATULATIONS ON YOUR NEW HANGOVER BAR!!
35mm SCREW
ST-PT19451855
Page 18