Dunster House Artemis P3-3050PRG Panduan Instalasi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Tempat penampungan Dunster House Artemis P3-3050PRG. Dunster House Artemis P3-3050PRG 17 halaman. Pergola 3m x 5m

Halaman Cetak

Assembly Instructions for Additional Wall Panels for Artemis Pergola

Components required - quantities vary depending on your purchase

glass 825x960

Panel CP8

60mm Screws

**Windows assembly**

Assemble the half height wall panels according to the instructions given on the previous pages.

Take off the beading trims from one side of the 'CP8' glass panel frames.

Position them on the top of the '105x20x900' sills so that these are flush with 'CP2' panels. Join the frames to each other

and the support posts using 2x 60mm screws per side. You will also need to screw these up into the '140x45' profiles and

down into the '105x20x900' sills using 2x 60mm screws per section.

Put the glass panes into the frames and secure by fixing the beading trims back.

Panel CP8

60mm Screws

Panel CP8

Frame with beading

trims removed

105x20x900

Panel CP2

Flush all components

Page 07