AudioBus DF2402 Petunjuk Keamanan dan Penggunaan

Jelajahi secara online atau unduh pdf Petunjuk Keamanan dan Penggunaan untuk Aksesori Mobil AudioBus DF2402. AudioBus DF2402 2 halaman. Fatigue detector

Halaman Cetak

DF2402

INSTRUCTIONS FOR:

INSTALATION

Connect the terminal.

Put the magnetic base on the detector's lower part.

Remove the adhesive protection and ﬁx the device in the

correct position, without interfering in the driver's view.

Connect the terminal and stare to the sensor lens untill

the indicative frontal LED becomes green, indicating a

correct face reading.

Sensor has to be installed in vertical position, do not

completely ﬁx the adhesive untill a correct face reading.

To check the system's correct working , frontal led has to

be unblinking or blinking when it detects the driver's eyes

opened. Correct distance for an optimal reading is

600-900mm, seeking for the LED to be glowing as much

time as it's possible.

The Green LED blinking is normal while the driver opens

the eyes, especially wearing glasses with mount.

If the green LED keeps glowing or blinkin when the driver

turns the head left or right, or moves up and down, means

the installation of the detector is even better.

Device installation must me inside a 20 degrees inclina-

tion range from the normal driver's view position, and if it's

istalled in front of him/her, it must be 15 degrees.

[email protected]

FATIGUE

DETECTOR

+34 976 59 69 00

We present you our:

DF2402