addlink SATA III Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan addlink SATA III. addlink SATA III 11 halaman. 6gb/s ssd for desktop & laptop v1.0

Halaman Cetak

SATA III 6Gb/s

SSD

User's Manual

INTRODUCTION

REQUIRED TOOLS

& PREPARE

DESKTOP INSTALL

LAPTOP INSTALL

FORMATTING THE

SSD IN WINDOWS

CAPACITY

CALCULATION

l Power off the system, disconnect all power cables, and remove the

battery.

l Locate the hard drive access panel; unscrew and remove the access

panel.

l Disconnect and remove the current storage drive from the drive bay

(refer to your system's user manual)

l Remove all brackets and connectors from your HDD and install it on the

SSD (if necessary).

Note: If a proprietary connector and/or bracket are present on the

HDD, carefully remove it and connect it to the SSD. Systems will vary

and these items may or may not be present.

l Insert the SSD into the drive bay carefully aligning the SSD with the

SATA* connectors.

l Secure the SSD in the drive bay. Reinstall the access panel and insert the

battery back into the system.

l Power on your system to verify a successful installation. For a boot drive,

this is signified by the BIOS prompting OS installation. For a secondary

drive, follow the format instructions below.

Note: If the SSD will be your primary boot drive, please refer to your

operating system's user

manual for further OS installation instructions. If this SSD will be used as a

secondary drive, formatting the drive is required before use.

*SATA 6Gbit/s is backwards compatible with SATA 3Gbit/s. However,

connecting a SATA 6Gbit/s device into a SATA 3Gbit/s connection will result

in reduced performance.