Free The Tone AS-1R Panduan Pemilik - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Perekaman Free The Tone AS-1R. Free The Tone AS-1R 8 halaman. Digital reverb

Halaman Cetak

Rear panel

Input (L (MONO)-IN-R) terminal

Terminal for connecting a

guitar, another instrument or

Output (L (MONO)-OUT-R) terminal

effects unit. Use the L

(MONO) terminal and R

This terminal is used to connect to an

terminal to connect a device

external amplifier or mixer. To feed

having stereo outputs.

monaural signals, connect to the L

Connect to the L (MONO)

(MONO) terminal.

terminal only when you are

using the AMBI SPACE in

monaural mode. Note that

the integrated HTS

circuit keeps the sound

texture the same

whether theeffect is

turned on or off.

Power DC 9V IN terminal

For connecting an

AC adapter with 9V

DC center negative

polarity. Requires at

least 280mA of

available current.

MIDI IN terminal

Input terminal for MIDI signals. This

terminal receives MIDI signals from an

external MIDI device.

Side panel

Bottom panel

INPUT LEVEL SELECT switch

This switch is used to select the input level

of the AMBI SPACE to match the output

level of the device to be connected to the

Input terminal. When connecting a device

with instrument level signals, set the switch

to the rear side (closer to the I/O jack). To

connect a device with line level signals, set

the switch to the front side.

Use a small flatblade screw driver to slide

the switch.

KILL DRY switch

This switch is used to prohibit the original

(dry) sound from being output from the

Output terminal. When this switch is set to

the on position, the original (dry) sound will

not be output. To turn on the KILL DRY

switch, set it to the front side (closer to the

foot switch). Use a small flatblade screw

driver to slide the switch.