Free The Tone PA-1QG Panduan Pemilik - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Perekaman Free The Tone PA-1QG. Free The Tone PA-1QG 9 halaman. Programmable analog 10 band eq graphic equalizer
Juga untuk Free The Tone PA-1QG: Panduan Pemilik (6 halaman), Manual (16 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemilik (6 halaman)
Halaman Cetak
1. Turn on the power to the unit while holding down the
1 n t
2. The LEVEL display shows "
".
3. Press the PARAMETER encoder to execute the initialization.
4. The PRESET display counts up from 01 to 99.
5. The LEVEL display shows the firmware version number.
6. All of the presets are returned to their factory default settings and usual operation resumes.
NOTE
This operation clears all of the presets and resets all of the settings to the default status as shipped from the
factory.
Transmitting Data to/from an External Device
The PA-1Q series can save or recall preset contents to/from a personal computer. For connection and setup
procedures, please confirm with the product or support page of the Free The Tone website.
The PA-1Q series can update its firmware. For the latest firmware or connection and setup procedures,
please confirm with the product or support page of the Free The Tone website.
10
Initializing
◀
cursor key switch and PRESET switch.
Updating Firmware
PA-1QG (for Guitar) Factory Presets
Preset 1: Fat sound with emphasized mid-low frequencies
50Hz 100
200
400
800
1500 2500 3500
7K
10K
00
00
03
04
05
04
01
00
00
00
Preset 3: Sound for jazz play with reduced high frequency level
50Hz 100
200
400
800
1500 2500 3500
7K
10K
-04
00
00
04
04
00
00
00
-03
-07
Preset 2: Sound for arpeggio with reduced mid range level
OUT
50Hz 100
200
400
800
1500 2500 3500
45
00
00
00
-02
-02
-02
00
01
Preset 4: Sound with flat EQ but boosted volume
OUT
50Hz 100
200
400
800
1500 2500 3500
100
00
00
00
00
00
00
00
00
7K
10K
OUT
01
00
110
7K
10K
OUT
00
00
120
11