Duolabs Qbox One Panduan Pengguna Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna Cepat untuk Penerima Duolabs Qbox One. Duolabs Qbox One 15 halaman. Dvb-s sat receiver

Menu Button If you are in TV- or RADIO-Mode, pressing this button will bring up the OSD main menu. The OSD

main menu has the following options:

-(1) TV Mode

-(2) Radio Mode

-(3) File Mode

-(4) Information

-(5) Shutdown

-(6) Setup

-(7) Games

-(8) Timer

You can switch to the needed option by pressing the Navigation-Buttons left or right.

Also see: Important notes about operation.

The numbers in front of each option can be used to directly access the needed function by pressing the according

number on the Numeric Keypad of your Remote control.

If you are in the service list, pressing the MENU-Button brings up the service menu. The shown options may vary

depending on the service list you selected.

The Power-Button switches your QBox on and off. See chapter Turning your Qbox on and off.

The TV-Mode-Button switches your remote control into TV control mode to control your preprogrammed TV. It will

shortly light up once your press the button. See chapter TV-Mode setup.

Enter a service number to directly access the option by using the Numeric Keypad. The service numbers are on

the left side of the service list. The Numeric Keypad can also be used to enter the teletext page number when you

are in TV-Control-Mode and if your TV is teletext capable. The TV station has to submit teletext information;

otherwise this feature cannot be used.

Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on the TV screen. Pressing

it again or pressing one of the Volume +/- Buttons brings back the audio.

You can leave all menus and service lists by pressing the EXIT-Button.

By pressing the OK-Button you confirm a selection in the menu or service list navigation. If no OSD menu is

present on your screen, the infobar is shown once you press the OK-Button.

In general the menus are controlled using the Navigation-Buttons on your remote control. To get into a submenu

you have to press the OK-Button.

The Volume +/- Buttons control the volume of the audio. Pressing + will make turn it up and pressing - will turn it

down.

By pressing the AUDIO-Button you can choose the different audio tracks offered by the station.

Pressing the VIDEO-Button activates the PVR-Mode. The Infobar will show the control symbols. You can instantly

start recording by pressing the Radio-Button on your remote control. You can also toggle between single-, double-

and trible-column-view in the service list.

All possible options are shown by the four colored dots/blocks (red, green, yellow, blue) and can be activated by

the Options-Buttons. In PVR-Mode these buttons are used to control the digital recording.

Depending on the menu you currently are in the options will change and will be named differently.

Pressing the TV-Button activates the TV-Mode.

Pressing the RADIO-Button activates the RADIO-Mode.

The TEXT-Button activates the Teletext (TuxTxt). If you are in the stations list, pressing this button will directly

take you to the FILE-Mode.

Pressing the HELP-Button activates the Help menu.