Free The Tone PA-1QB Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Ekualiser Stereo Free The Tone PA-1QB. Free The Tone PA-1QB 16 halaman. Programmable analog 10 band eq graphic equalizer
Juga untuk Free The Tone PA-1QB: Panduan Pemilik (6 halaman), Panduan Pemilik (9 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemilik (6 halaman)

Halaman Cetak
Free The Tone PA-1QB Manual
Transferring preset data to another PA-1Q series unit
1. Prepare a MIDI cable and connect it between the [MIDI OUT/THRU] terminal on the preset sending PA-1Q series unit and
the [MIDI IN] terminal on the preset receiving PA-1Q series unit.
2. On each PA-1Q series unit, turn on the power while holding down both the 【◀Cursor Key】 and 【Save】 switches.
3. The [LEVEL] display flashes "
4. On the preset receiving PA-1Q series unit, turn the 【PARAMETER】 encoder switch until the 【LEVEL】 display shows "
". Then, press the 【PARAMETER】 encoder switch.
rec
5. When "
" on the display changes from flashing to lit, you are ready to transfer preset data.
rec
6. On the preset sending PA-1Q series unit, turn the 【PARAMETER】 encoder switch until the 【LEVEL】   display shows "
". Then, press the 【PARAMETER】 encoder switch.
s nd
7. On both the preset receiving and sending PA-1Q series units, the 【PRESET】 display starts counting up from "00" to "99" and
the unit will automatically reboot itself and show the firmware version, and the transfer will then be completed.
This will take about 1 second on the sending side and 5 seconds on the receiving side.
Saving preset data to a personal computer/Sending preset data to PA-1Q series
1.Preparation of personal computer and MIDI interface:
1) Prepare a Windows PC or Macintosh and a MIDI interface.
2) Connect the personal computer to the MIDI interface.
3) Download a MIDI interface driver and make the system ready for data transmission.
Do not connect the PA-1Q series unit to the MIDI interface at this step.
For setting up information of the MIDI interface, please refer to its manual.
NOTE: As we use a YAMAHA USB-MIDI interface UX16 for operation evaluations at Free The Tone, we recommend to use
     this model.
2. Obtain MIDI software and install it in your personal computer:
For Macintosh, refer to page 3.
For Windows PC, refer to page 11.
"
s nd
2