Free2Move eSolutions ProWallbox Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Mobil Free2Move eSolutions ProWallbox. Free2Move eSolutions ProWallbox 14 halaman.

Halaman Cetak
3.1
ENERGY METER CONFIGURATION
1.
Enter the menu by tapping&holding for 1.5 second the central display button for
three-phase meter (or the lower part of the display for single-phase), until the
page with the password is shown. Skip to the next page by pressing press both
left and right (or upper and lower) display button.
2.
Now tap on the left (or upper for single-phase) display button to navigate menu.
3.
To configure the Gavazzi Meter, enter the parameters by tapping&holding the
central (or lower for single-phase) display button and change them with the left
(or upper for single-phase) button:
a.
b.
c.
d.
4.
To configure Finder Meter select COMMUNICATION command (COMM on single-
phase meter), press and hold to enter the menu. Here set:
a.
b.
c.
d.
5.
For three-phase Finder Meter only, select INSTALLATION, press and hold to enter
the menu. Set:
a.
6.
Set the model of Power Meter installed on
Parameter: DPM_TYPE
This field allows to select the Power Meter model installed
UUID:
f0f924f8-34ce-4f1d-9791-b1b19ff3ffe4
TYPE:
VALUE:
Installation manual - Annex
System mode: 3Pn (For three-phase meter only)
Modbus address: 1
BaudRate: 38.4 kbps
Parity bit: Even
Device address: 001
Bits per second (baud): 38400 bit/s
Parity: Even
Stop bit: 1
Connection mode: 3L+N "Arithmetic"
Uint8, select UINT8 on the app
00 → FINDER 7M.38.8.400.0212
01 → FINDER 7M.24.8.230.0210
02 → GAVAZZI EM330DINAV53HS1X
03 → GAVAZZI EM111DINAV51XS1X
A d v a n c e d f u n c t i o n a l i t i e s s e t u p
nRF Connect
8
app: