AudioCodes 320HD Panduan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Telepon IP AudioCodes 320HD. AudioCodes 320HD 2 halaman. And elastix server
Juga untuk AudioCodes 320HD: Setup Manual (10 halaman)

Halaman Cetak
AudioCodes 300HD Series IP Phones
3. Cabling the Phone
Follow the procedure below for cabling your phone.
To cable the phone:
1.
Connect the RJ-9 handset jack to the handset.
2.
Optionally, connect the RJ-9 headset jack to a headset.
3.
Connect the RJ-45 port labeled LAN to your LAN
network (LAN port or LAN switch/router), using
a CAT 5 Ethernet cable.
4.
Connect the RJ-45 LAN port labeled PC to your
computer, using a CAT 5 straight-
through Ethernet cable.
5.
Connect the connector tip of the AC
power adapter to the phone's power
socket (labeled DC 12V). Connect the
two-prong AC adapter directly to the
electrical wall outlet; all the phone's
LEDs momentarily light red.
Warning:
Prior to connecting power, refer to the Compliancy and Regulatory
Information at www.audiocodes.com/library.
4. Adjusting the Angle of the Phone
You can adjust the angle of the phone in the vertical plane using the phone's bracket.
To adjust the phone in the vertical plane:
1.
Press tab (A) to loosen the bracket lock.
2.
As you press the tab, move (B) up or down a slot to
adjust the tilt of the phone.
3.
Release tab (A) to lock the bracket in the
desired slot.
To mount the phone on a wall, refer to the
phone's User's Manual.
AudioCodes 300HD Series IP Phones
5. Basic Phone Operation
To make a call:
Handset: pick up the handset, enter the phone number, and then press the Dial
softkey or wait a few seconds until the phone automatically dials the number.
Hands-free mode: press the SPEAKER, HEADSET, or LINE key, enter the phone
number, and then press the Dial softkey or wait a few seconds until the phone
automatically dials the number.
Speed dialing: press the required Speed Dial key (if configured).
Phone directory: press the directory icon
and then press the Dial softkey.
Redialing a number: press the REDIAL key, select a previously dialed number, and
then press the Dial softkey.
To answer a call:
Handset: pick up the handset.
Hands-free mode: press the SPEAKER, HEADSET, or LINE key.
Answering another call: press the flashing red LINE key or the Accept softkey.
To return to the previous call, press its LINE key.
To place a call on hold and make another call:
During a call, press the New Call softkey, enter the phone number, and then press the Dial
softkey. To return to the previous call, press its corresponding LINE key (flashing green).
To mute a call:
During a call, press the MUTE key. You can hear the caller but the caller cannot hear you.
To speak with the caller again, press MUTE again.
To forward incoming calls to another phone:
1.
Press the Forward softkey (in the idle screen).
2.
Choose the condition upon which you want calls to be forwarded - "Always", "Busy", or
"No Reply" (using the up/down
select the time after which the call is forwarded if not answered (using the
Navigation keys).
3.
Press the Select softkey, and then enter the number (or select a contact from the
directory) to where you want the calls to be forwarded.
4.
Press the Start softkey; call forward is activated and the call forward
displayed on the idle screen.
To deactivate call forwarding, press the Forward softkey; the
displayed on the screen.
softkey, select the required contact,
Navigation keys). If you choose "No Answer", then
icon is no longer
left/right
icon is