AudioCodes 320HD Setup Manual - Halaman 7

Jelajahi secara online atau unduh pdf Setup Manual untuk Telepon IP AudioCodes 320HD. AudioCodes 320HD 10 halaman. And elastix server
Juga untuk AudioCodes 320HD: Panduan Cepat (2 halaman)

Halaman Cetak

1. Use the information from the Add SIP Extension page (Figure 4-4) to enter the

following necessary information on "Quick Setup" section of the AudioCodes Phone

WebUI:

SIP Proxy and Registrar



Use SIP Proxy: Enable



Proxy IP Address or Hostname: Elastix Server's IP Address (192.168.5.186

in this example)



Proxy Port: 5060



Use SIP Proxy IP and Port for Registration: Enable

Line Settings



Line Activate: Enable



User ID: (301 in this example)



Authentication User Name: (301 in this example)



Authentication Password: ('h7Dka3Rf9si0t' in this example)

Figure 4-8. Account Configuration

2. Once you have entered the required information, click on 'Submit' button located at

the end of the page. If the phone is not able to register, make sure you've entered the

correct information.

3. Configure the other IP (SIP) Phone with the correct parameters.

4. To test the AudioCodes 320HD, pick up the previously configured IP (SIP) Phone

and call the AudioCodes 320HD's extension number (301 in this example). When the

call is established, speak into the phone and verify that the other IP (SIP) Phone can

hear your voice. Check this by calling from both ends. This step completes the

procedure.

AudioCodes 320HD Server Setup Guide

MANUAL CONFIGURATION

PaloSanto Solutions