AudioCodes MP-20 Series Panduan Pertanyaan yang Sering Diajukan - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pertanyaan yang Sering Diajukan untuk Adaptor AudioCodes MP-20 Series. AudioCodes MP-20 Series 20 halaman. Telephone adapter
Juga untuk AudioCodes MP-20 Series: Panduan Pengaturan Cepat (8 halaman), Panduan Instalasi Cepat (2 halaman), Panduan Instalasi Cepat (2 halaman)
Halaman Cetak
Default Configuration
Q1:
How do I restore MP-20x to factory default settings?
A:
You can restore MP-20x to default settings using one of the following methods:
Web interface:
a)
Logon to the Web interface.
b)
Access the 'Restore Defaults' screen (Advanced menu > Restore Defaults
c)
Click OK.
Figure 4: Restoring Factory Defaults in the Restore Defaults Screen
Telnet:
a)
Telnet MP-20x from the LAN.
b)
At the CLI prompt, run the following command:
restore_defaults
Hardware Reset button: The Reset button is located on the rear panel of MP-20x.
a)
Disconnect MP-20x from power.
b)
Using a sharp pointed object (such as a pin), press the button and at the same time,
re-connect power to MP-20x.
For additional information, refer to LTRT-50606 MP-20x Telephone Adapter User's Manual
Ver. 2.6.2, Section 13.5, "Restoring Default Settings".
Figure 5: Restoring Defaults using Telnet
Page 10
AudioCodes Customer Support
icon).