Audiocom Audiocom BP-2002 Panduan Petunjuk Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem interkom Audiocom Audiocom BP-2002. Audiocom Audiocom BP-2002 18 halaman. Beltpacks audicom intercom systems

Halaman Cetak

Optional Football Modifications

General Description

In Audiocom® Intercom Systems, the Mic-Kill feature is used to turn OFF any

activated microphones on a selected channel. The Mic-Kill feature is activated when

the beltpack receives a 24kHz signal from the channel. In some application the Mic-

Kill and Call Signal features are not desired and need to be disabled.

Eliminating Mic-Kill and Call Signal

CAUTION: To prevent damage to the equipment, these modifications should only be

made by qualified technicians.

If desired, the Mic-Kill and Call Signal features can be disabled in the BP-2002/1002

by removing a surface mounted capacitor from the printed circuit board.

To remove the capacitor, do the following:

Before making changes to the printed circuit board, disconnect all power and

line connections from the beltpack.

Refer to Figure 3 and locate C61 on the underside of the printed circuit

board.

Remove capacitor C61 from the printed circuit board.

Restoring Mic-Kill and Call Signal

To restore the Mic-Kill and Call Signal features, replace C61 with Telex

number 102881-140, 1500pF, 50V capacitor.

part

Operation