Duplo DBM-70 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Lipat Duplo DBM-70. Duplo DBM-70 17 halaman. Stapler folder

DBM70 Instruction ver 1.doc

4.4 Paper Width Settings:

Both sides guides should be adjusted for a given size of paper. Loosen the thumbscrews and

move the side guides until their outside edges are level with the marking on the scale

corresponding to the width of the paper, and then re-tighten the thumbscrews so that the guides

are held in place.

Note that the marked settings are meant to be wider than the paper, to allow for side jog.

Both guides move inwards on each cycle to the correct width to ensure that the sheets are

aligned before stapling occurs.

Page 8

Figure 4 - Side guides.

Side guide

clamp thumbscrew

Side guide

scale

3/12/01