Duplo DB-200 Panduan Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Mesin Penjilid Duplo DB-200. Duplo DB-200 18 halaman. Perfect binder

Installation

Note: You must remove the three red shipping brackets before installing your DB-250.

The procedures for installation:

Remove the red shipping bracket located on the

left side of the clamp station as shown. Then

reinstall the screws in clamp station.

Remove two red shipping brackets that are

located around the nipping station as shown.

Lift up your DB-250, slide in the bottom cover

first. Then slide in the glue draining tray

underneath the glue tank as shown.

Place your DB-250 on a safe, firm and solid

table. Then mount the cover-sheet holder to the

right side of the machine as shown.

Note: (A) For Adjusting the Glue, Replenishing the Glue Tank, Nipping Pressure

Control or Glue Replacement, please refer to the operation procedure (F),

(G) and (H) for details.

(B) You also can change the

necessary. Note that we only recommend you to change TR1. For "

TIMERS"

factory settings of your DB-250 operation if

, please refer to APPENDIX on page 14.

SETUP FOR