AudioEngine A5+ Setup Manual - Halaman 6

Jelajahi secara online atau unduh pdf Setup Manual untuk Pembicara AudioEngine A5+. AudioEngine A5+ 9 halaman. Premium powered bookshelf speakers

Setup and Operation (cont'd)

Step 3 – Connecting the Power Cord

1. Verify that the power switch on the left speaker rear panel is in the

OFF position.

2. Con rm that the rear panel voltage selector switch is set to the

proper voltage for your area.

3. Connect the power cord into the left speaker and the other end

into an AC power outlet.

A5+ Back Left







Note:

We recommend using a high-quality surge suppressor and/or AC line

lter on all electronics equipment.

audioengine A5+ setup guide

A5+ Back Right

OFF

Step 4 – Connecting Audio Cables

Using the appropriate audio cable (3.5" mini-jack and/or RCA cable),

connect your audio source (computer, iPod, etc.) to the A5+ audio

inputs. One of each cable type is included.

Note:

Both audio inputs on the A5+ are active so two audio sources may be

connected to the speakers at the same time without the need for an

input switch.

Step 5 – Operation

1. Move the A5+ rear panel power switch to the ON position. The left

speaker front panel power indicator should ash a few times then

go solid.

2. Turn on your audio input source and adjust the volume to the

desired listening level.

3. Adjust the A5+ speaker volume level with the volume knob on the

front panel or with the included remote control.

Break-in Period

Your speakers will sound great out of the box and will get better over

time. No need to do anything else but listen to them, but give them at

least 30 to 50 hours break-in time before doing any critical listening.

Cleaning

We don't recommend using any solvents or cleaners on Audioengine

cabinets or speakers. Just wipe down with a soft, dry cloth.

audioengine A5+ setup guide