Dangerous Music Convert-2 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman Dangerous Music Convert-2. Dangerous Music Convert-2 14 halaman.

4. AES/SPDIF-2: USB UPSTREAM RETURN

Feature: The input source connected to AES/SPDIF-2 can actually be routed back up USB and into the session.

Benefit: This can be leveraged as a digital through for a final mixdown, thus allowing the engineer to toggle between AES/

SPDIF-2 and USB (pre plug-in treatments and post plug-in treatments).

Operation: To activate this feature, simply press and hold the AES/SPDIF-2 button until the green "TO USB" light engages.

Note:

AES/SPDIF-1 & ADAT inputs are disabled in this mode to maintain clock bidirectionally.

5. CUSTOM METERING

[DIGITAL LED METER PICTURED ABOVE]

Feature: Premium custom crafted digital meter.

Benefit: Simultaneously view "Peak Over Average". This reveals the audio's crest factor by supplying both RMS information and

Peak information, aiding the quest to retain dynamics and music's emotive properties.

Tip:

The meters change from green to yellow at the user determined calibration point. In other words, -14dBFS, -16dBFS

or -18dBFS depending on the Calibration selected (see section 2. Calibration).

Tip:

At -6dBFS, the LEDs turn red and the scale changes: instead of 1dB steps per LED, they are very refined 0.5dB steps.

Tip:

When the "3 Word Over Indicator" turns the last LED from green to red, this signifies that three consecutive samples

have clipped. This is the limit of tolerance for a CD pressing plant to reject the project and a warning- cease flirting

with digital overs.

6. WORD CLOCK

[WORD CLOCK SELECT SECTION PICTURED ABOVE]

Feature: 3 Modes: Normal, External and Master.

Benefit: Normal: With the button de-selected (dim light) the Convert-2 will sync to any incoming clock via any of the digital

CONVERT-2 |