FREEDOM GRILL FG-50 Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk panggangan FREEDOM GRILL FG-50. FREEDOM GRILL FG-50 12 halaman.

Halaman Cetak

A S S E M B LY — AT TA C H I N G T H E G R I L L TO YO U R V E H I C L E ' S H I TC H

Install legs using the 6 provided screws

and a Phillips Head Screwdriver.

DO NOT DRIVE VEHICLE WITH THE

FG-50 INSTALLED UNTIL ALL OF THE

INSTRUCTIONS ON THIS PAGE HAVE

BEEN COMPLETED!

Tighten the arm collar. Lock the grill head

onto the arm with a padlock.

DO NOT MOVE VEHICLE UNLESS THE GRILL

HEAD IS LOCKED IN PLACE.

Slide the swing away arm assembly into

your hitch and secure it with the hitch

stabilizer bolt.

Tighten the bolt

using a 15/16"

wrench, make

sure to tighten

the bolt all the

way through to

the other side of

the hitch, slide

the cotter pin

into the bolt.

DO NOT MOVE VEHICLE UNLESS THE

SWING AWAY ARM ASSEMBLY IS

SECURELY BOLTED ONTO THE HITCH.

Swing the arm closed, pushing

towards the vehicle until the slam-

latch is fully engaged.

Make sure that side tables are folded

securely under the grill hood. Make sure

that the condiment holder is securely

snapped shut.

DO NOT DRIVE WITH A PROPANE

CYLINDER INSTALLED ON THE GRILL.

Fold canister hook on the right side of the

grill head back against the side.

A. Pull out and twist the hinge spring lock.

B. Release the slam-latch by pressing

down on the lever.

Rotate the hinge spring lock to

engage the plunger.

Swing the arm

away from the

vehicle and

lock at the 90

degree position

for stability. Place

the grill head onto

the arm.

Thread the knob into the arm collar clamp.

Do not over-tighten. Slide the cotter pin

through the hole at the end

of the bolt.

Close the hood latch,

hinge spring lock

and slam-latch.

DO NOT MOVE VEHICLE UNLESS THE

HOOD LATCH, HINGE SPRING LOCK &

SLAM-LATCH ARE SECURE.