AudioEngine S8 Setup Manual - Halaman 5

Jelajahi secara online atau unduh pdf Setup Manual untuk Pembicara AudioEngine S8. AudioEngine S8 13 halaman. Premium powered subwoofer
Juga untuk AudioEngine S8: Spesifikasi (2 halaman), Setup Manual (10 halaman)

Halaman Cetak

Controls

Your S8 Powered Subwoofer offers simple yet versatile setting

options. After you've become familiar with what these settings

do, don't hesitate to experiment with them to find the sound

that works best with your system.

When you set up your subwoofer for the first time, you will prob-

ably make adjustments a few times before you hear what you

like. Start with the volume at 50% and keep in mind that as with

subwoofer room placement, there are really no right or wrong

settings.

Following is an overview of the subwoofer controls and connec-

tions:

1) Inputs

The RCA and 3.5mm mini-jack inputs are line-level audio inputs

S8 setup guide

used for connecting the output of your audio source (receiver,

TV, iPod, computer, etc.) into your S8 subwoofer. Both inputs are

active so no switching is required if you wish to use inputs from

two different audio sources plugged in at the same time.

Note: If your receiver has a single (mono) subwoofer output, con-

nect an RCA cable from this output to the RIGHT RCA input on

the S8 rear panel.

2) LFE In

If your preamplifier or receiver has an LFE ("Low Frequency Ef-

fects") input or single SUB output connect it to this "LFE In" input

connector on the subwoofer.

Note: Most receivers have a subwoofer preamp mono or stereo

output, so LFE will most likely remain unconnected.

3) Output

The Output connectors provide a full-range line-level output to