AUDIOFOCUS EVO8a Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo AUDIOFOCUS EVO8a. AUDIOFOCUS EVO8a 16 halaman.

Introduction

Thank you for purchasing AudioFocus©. That product is designed and made in Belgium with the highest quality

control and reliability. We hope you'll be fully satisfied by this device.

EVO(a) serial has been designed for small to middle fixed or touring applications. Our main philosophy is that each

model is available in active or passive version. This manual is made for both versions and is divided in three

subsections: active, passive, and a third section for EVOSubXXa-flex.

Thanks again and good reading, AF team

What's the difference between EVO and AudioFocus competitors?

Special EQ

The EVOa integrates more HiFi dynamic features. At the same time, EVOa has flat response for several presets. We

worked very hard on the ''extended'' preset to give possibility to use the EVOa tops without any subs. We use our

own DSP technologies to achieve that point of schedule and reach very high spl and low cutoff frequencies.

New AudioFocus transducers

The other main difference is that we designed our own transducers with very precise electro-mechanicals

parameters to reach the best stability as possible, and have low distortions and very good transient response in small

cabinets. These loudspeakers have been developed with state of the art companies such as Ciare, Sica or Faitalpro to

achieve high quality transducers you can only find in AudioFocus' EVO(a) range.

Wedge/monitor application

The EVO top models can be used for front stage or as wedge (mirror configuration) as described here below:

In asymetrical configuration, the difference of path between acoustical sources and singer may occur in audio

confusions. In symetrical configuration the there's no delay between the two cabinets. Image of the sound is better

and more precise.

EVO(a) series user's manual