Daniamant L90 Petunjuk Pemasangan dan Pemeliharaan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan dan Pemeliharaan untuk Peralatan Pencahayaan Daniamant L90. Daniamant L90 4 halaman. Lifebuoy light

General
A lifebuoy light marks the position of a lifebuoy. It is attached to the lifebuoys on board the ship. In case
of a man overboard, the lifebuoy will be thrown overboard together with the lifebuoy light. It marks the
position of the lifebuoy for the person who has gone overboard and for the ship or the rescue boat.
Stowage
Lifebuoy lights are provided on ships (a lifebuoy light is connected to every second lifebuoy; minimum is
2 lifebuoy lights per ship).
The L90 Lifebuoy Light has been constructed to withstand a drop into the water from at least 30M as
required by LSA Code (Chapter II, Section 2.1.1.6). This model has been tested and approved to 76M.
Maximum stowage height: 76M
Instructions for use
Initial fitting
To avoid battery drain in transit, the lamp of the L90 is not fully fitted. When the L90 is initially fitted to
the vessel, ensure that the lamp is fitted as per the following instructions
The above instructions are also printed on the body of the lifebuoy light
Install lifebuoy light into bracket with the light in an inverted position.
Tie the lanyard to the lifebuoy.
In case of an emergency (man overboard) throw the light overboard together with the lifebuoy.