Audiolux VA-PWS-6/1154 Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pembicara Audiolux VA-PWS-6/1154. Audiolux VA-PWS-6/1154 8 halaman. Voice-assistant wireless speaker
Halaman Cetak
INSTRUCTIONS FOR USE
Charging Instructions
The Bluetooth Speaker comes with a built in rechargeable battery. Before using it for the first time we
recommend you to charge the battery fully. It takes 3-5 hours to fully charge the battery. Only use the
supplied USB Cord to charge the Bluetooth Speaker.
Connect the USB charging cord to a computer USB port and the Micro USB plug to the charging port of
the device. The Red LED light turns on while the device is charging. It takes 3-5 hours for the speaker to
fully charge. When the battery is fully charged, the LED light will turn off.
Switching on/off the device
Press and hold the ON/OFF button for 2-3 seconds to turn on/off the device.
Pairing the device with Bluetooth devices (phone or music device)
Ensure the device is turned off, then press and hold the ON/OFF button for 2-3 seconds to turn on the
device, you would hear an indication tone and the LED flashes blue rapidly. Place the Bluetooth Speaker
and Bluetooth device (phone or music device) so that they are no further than 3 feet apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the
manufacturer's instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the "Audiolux Speaker" from the list of
available Bluetooth devices.
If required, enter the password '0000' to confirm & finalize pairing.
Once paired successful, you would hear another indication tone, and the LED would stay blue.
You can now start to use the device.
If pairing is unsuccessful, turn off the device first and then re-pair following the above steps.
Once you have paired the Bluetooth Speaker with a device, the Speaker will remember this device and
will pair automatically when the device's Bluetooth is activated and in range. You do not need to re-pair
any previously connected devices.
The Bluetooth Speaker will attempt to automatically connect to the last device it was paired with when
switched on. If you want to pair it with a new device, please follow the steps outlined above.
Once the Bluetooth Speaker is paired with your device the music will transmit through the Bluetooth
Speaker. Please refer to your device's user manual for further information.
Making a call with the Bluetooth Speaker in Bluetooth mode
Basic operation
Please ensure that you are paired with the Bluetooth Speaker to use the below functions.
Function
Answer Incoming
Call
Reject incoming call
End Call
Increase Volume
Decrease Volume
Operation
Button
Press the Phone once to answer an incoming call.
Incoming Call
Incoming Call
Press and hold the Phone button
Incoming Call
After your phone conversation, short press the Phone button
During a call
Press and hold the Volume Increase button to increase the
volume
During a call
Press and hold the Volume Decrease button to decrease the
volume
4