Danish Interpretation Systems IT 6108 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemancar Danish Interpretation Systems IT 6108. Danish Interpretation Systems IT 6108 14 halaman. Digital conference system infrared transmitter

Halaman Cetak

Danish Interpretation Systems

Important

Compliancy

The equipment has been tested and found to comply

with the limits of the CE test. These limits are

designed to provide reasonable protection against

harmful interference when the equipment is

operated in a commercial environment. The

equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in

accordance with the user manual it may cause

harmful interference to radio communications.

You

are

cautioned

modifications not expressly approved in this manual

could void your authority to operate this equipment.

Main lead wire ring

The wires in the main lead are coloured in

accordance with the following codes:

Green-and-yellow

Blue

Brown

The colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug, so

please proceed as follows:

The green-and-yellow wire must be connected to

the terminal in the plug marked with the letter E or

with the safety earth symbol or marked with green-

and-yellow colour. The blue wire must be

connected to the terminal marked with the letter N

or marked with black colour. The brown wire must

be connected to the terminal marked with the letter

L or marked with red colour.

The equipment must be connected to earth

that

any

changes

Earth

Neutral

Live

Manual 01 18 04452, Printed in Denmark, 02/2003 CHN

Safety

Check that the operating voltage of the unit is

identical with the voltage of your local power

supply. If a voltage conversion is required, consult

your DIS dealer or qualified personnel.

Should any liquid or solid object fall into the

cabinet, unplug the unit and have it checked by

qualified personnel before operating it further.

Unplug the unit from the wall outlet or set the Main

Power switch to OFF if it is not used for several

days.

To disconnect the cord, pull it out holding the plug.

Never pull the cord itself.

Installation precautions

Allow adequate air circulation to prevent internal

heat built-up. Do not place the unit on a surface

(rugs, blankets, etc.) that may block the ventilation

holes.

Do not install the unit in a location near heat

sources such as radiators or air ducts, or in a place

exposed to direct sunlight, excessive dust or

humidity, mechanical vibration or shock.

To avoid moisture condensations do not install the

unit where the temperature may rise rapidly.

Cleaning

To keep the cabinet in its original condition,

periodically clean it with a soft cloth. Stubborn

stains may be removed with a cloth lightly

dampened with a mild detergent solution. Never use

organic solvents such as thinners or abrasive

cleaners since these will damage the cabinet.

Operation manual