Audiomatica 4 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Audiomatica 4. Audiomatica 4 13 halaman. Amplifier & switch box

7 - PARALLEL PORT CONFIGURATION

The parallel port you use to control the QCBOX Model 4 must be configured in
STANDARD (or NORMAL or AT) mode.
Be sure that the parallel port is NOT in ECP mode otherwise the software control
won't take place.
There is a simple way to check if the parallel port is properly configured. Click with the
right mouse button on the 'My Computer' icon on the Windows desktop. Then click
'Properties', select the 'Hardware' tab and press the 'Device Manager' button as in figure.
Then select 'Ports (COM&LPT)'. The situation above is correct, the parallel port is
configured in standard mode.
You may find the following situation:
In this case the parallel port must be reconfigured as outlined before. The only way to
8