Conrad Electronic 2884220 Panduan Petunjuk Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Ukur Conrad Electronic 2884220. Conrad Electronic 2884220 6 halaman. Thermohygrometer with co2 detector

Halaman Cetak

When setup is complete, the display should

look like the right-hand screenshot. If any-

thing went wrong, repeat the process.

Tap the pencil icon to assign an individual

name to the new device.

If you have previously created a profile with

rooms, you can assign the device to a room.

Tap the desired room under the name of the

device so that it is highlighted with a dark

background.

Finally, tap the blue lettering at the bottom to

complete the setup.

The newly added device will be displayed on

the main page (see the first screenshot in the next section).

The device assigned to a room will appear under the respective room.

If you tap to switch to a room, you will only see the devices that are linked to that room.

9 Operation in the app

Tapping on the device on the app's main

page opens the page with advanced features

and settings.

You can delete the device from the app by

tapping on the device on the main page un-

til the delete button appears on the display

below.

Then tap the button and confirm.

The product page always shows the current

temperature, humidity and CO

concentration

values.

It also shows the battery status.

You can also set the display brightness and

adjust the alarm volume.

Tapping the button at the top right below the

name shows the measured data in a diagram.

Tapping the pencil icon at the top right opens

the current device's general settings. These

settings are available for each unit linked to

the app.

Here you can update the firmware or create a

shortcut on your home screen.

Tapping the arrow at the top left takes you

out of the control page and back to the app's

main page.

10 Cleaning and care

Important:

– Never use aggressive detergents, rubbing alcohol or other chemical solutions, as the-

se could damage the housing or even impair the functioning of the product.

– Do not immerse the product in water.

1. Disconnect the product from the power supply.

2. Use a damp, lint-free cloth to clean the product.

11 Disposal

This symbol must appear on any electrical and electronic equipment placed on the

EU market. This symbol indicates that this device should not be disposed of as

unsorted municipal waste at the end of its service life.

Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose

of it separately from unsorted municipal waste. Spent batteries and accumulators,

which are not enclosed by the WEEE, as well as lamps that can be removed from

the WEEE in a non-destructive manner, must be removed by end users from the

WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back

of waste. Conrad provides the following return options free of charge (more details on our

website):

in our Conrad offices

at the Conrad collection points

at the collection points of public waste management authorities or the collection points set

up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.

It should be noted that different obligations about the return or recycling of WEEE may apply in

countries outside of Germany.

12 Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this

product conforms to the 2014/53/EU directive.

Click on the following link to read the full text of the EU declaration of conformity:

conrad.com/downloads

Enter the product item number in the search box. You can then download the EU declaration of

conformity in the available languages.

13 Technical data

13.1 Power supply

Input voltage ................................. 5 V/DC

Power consumption ...................... max 1 A

Input.............................................. USB Type-C

Battery (built-in) ............................ rechargeable lithium polymer battery, 3.7 V, 2000 mAh

Battery life ..................................... min. 12, max. 18 hours

13.2 Thermohygrometer with CO

Product life .................................... max. 10 years

Display .......................................... LED

Temperature display range ........... 0 to +65 °C

Temperature resolution ................. ± 1 °C

Humidity display range ................. 0 – 99% RH

Humidity resolution ....................... ± 5% RH

display range ......................... 400 – 5000 ppm

accuracy ................................ ± (50 ppm + 5%)

resolution .............................. 1 ppm

13.3 Wireless module

Wi-Fi ............................................. IEEE802.11b/g/n, 2.4 GHz

Frequency ..................................... 2.412 – 2.472 GHz

Transmission power...................... <20 dBm

Wi-Fi range ................................... max. 100 m (in open space)

13.4 Miscellaneous

Supported operating systems ....... Android

Dimensions (W x H x D) ............... approx. 100 x 100 x 30.5 mm

Weight .......................................... approx. 158 g

13.5 Ambient conditions

Operating temperature ................. 0 to +65 °C, 0 – 99% RH (non-condensing)

Storage temperature ..................... 0 to +70 °C, 0 – 99% RH (non-condensing)

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

detector

6.0 or later; Apple iOS 10.0 or later

*#2884220_V1_0723_02_m_VTP_EN