3xLogic V Series Panduan Memulai Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Keamanan 3xLogic V Series. 3xLogic V Series 13 halaman.

5 View Video on Camera Web Interface

Once the device's proper IP address has been identified, type the IP into a web browser URL (Microsoft Internet

Explorer/Edge required for ActiveX control) to view the camera's web interface and video stream images. The

default username and password is admin/12345. After initial access, an ActiveX control installation pop up may

deploy. ActiveX is required for viewing video in the browser.

5.1

Steps:

1).

When the browser asks to install the AxUMF software, click Install to proceed.

2).

When the setup installation pop-up window appears, click Install to proceed with rest of installation.

NOTE:

Depending on system OS and Internet Explorer version, installation experience may differ from one another.

Figures described above are from Windows 7, Internet Explorer 9 environment.

Upon completion, the camera's web interface will be fully accessible for video viewing and settings

configuration.

Perform the following procedures to reset your device:

Steps:

1).

Press the Reset button, and hold it for 2 seconds while the device is in use.

2).

Wait for the system to reboot.

CAUTION:

Please do not hold the reset button for more than 2 seconds. Otherwise, the camera may be switched to its

Factory Default settings.

3).

Open the 3xLOGIC Camera Setup Utility.

4).

Select your device.

5).

Open Advanced Settings.

6).

Click Reboot.

10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC

VISIX Camera Quick Start Guide | VX-2A-B-IWD (R)

-Or-