Addonics Technologies AEMEDUSIB25S Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Addonics Technologies AEMEDUSIB25S. Addonics Technologies AEMEDUSIB25S 18 halaman. Combo hard drive & mobile rack

Halaman Cetak

Jumper settings inside the Combo Hard Drive25 Case

Internal Hard Drive

With USIB Interface cable

With IDE cable

Default jumper setting

(Use This setting when the

Jumper setting to enable

USIB drive cradle is

DMA When USIB drive

connected to USB, Firewire

cradle is connected to

or SATA)

the IDE controller

JP4 = Jumper to the Right

JP4 = Jumper to the Left

JP3 = No Jumper

JP3 = Jumper to the Left

JP2 = No Jumper

Note:

There may be spare

jumpers in JP2 and JP3.

These spare jumpers

should be sitting on the

outer pin only

Addonics Technologies – Combo Hard Drive USIB25 Users Guide v1.0

External Hard Drive

Default Jumper Setting

(When the enclosure is

used as an External

Hard Drive)