Conrad-Johnson ET7-S2 Panduan Pemilik - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Conrad-Johnson ET7-S2. Conrad-Johnson ET7-S2 13 halaman. Vacuum-tube line-stage preamplifier
Halaman Cetak
the volume control. When the EPL1 or THEATER inputs are
selected, the selected source will first pass through the external
processor loop before being routed to the volume control. When
THEATER is selected, the level will be set and locked to unity gain.
Remote Control
All operations of the ET7 can be controlled by the wireless remote
unit.
MUTE: Pressing the mute button will cause the main outputs to
mute and the level display to be zero. Pressing it again will restore
the last level setting. Pressing and holding the mute button for
more than three seconds will switch the ET7 into standby mode (all
tube circuitry switched off). Pressing the mute button when the unit
is in standby mode will switch it back on.
SELECTORS (PH/AUX, TUNER, CD, VIDEO, AUX2): You can
directly access any of these inputs by pressing the associated
button on the remote.
EPLS (EPL1, EPL2): Pressing the EPL buttons inserts the
associated processor in the signal path. Pressing the button again
will re-establish a direct connection to the selected source.
Pressing the EPL2 button selects the THEATER input, setting the
level to unity gain.
LEVEL (+, -): Duplicates the function of the front panel <vol up>,
<vol dn> controls.
BALANCE: Allows attenuation of either channel independently of
the other. Pressing the right balance button will reduce the left
channel level setting by one step. Pressing and holding the right
balance button will cause the left channel to cycle down through its
level settings at an accelerating rate. Pressing the left balance
button will attenuate the right channel in the same manner.
Conrad-Johnson ET7 Owner's Manual
8