Conrad-Johnson MET1 Panduan Pemilik - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Conrad-Johnson MET1. Conrad-Johnson MET1 14 halaman. Multi-channel enhanced-triode preamplifier

Halaman Cetak

pecifications

Gain: 25.5 dB

Maximum Output: 6V rms

Bandpass: 2Hz to more than 100kHz

Hum and Noise: 100 dB below 2.5V output

Distortion at 1.0 V output: less than .1% THD or IMD

Phase: inverts phase of all inputs at main out

Ouput Impedance: 200 ohms

Mechanical

Dimensions: 15.5"D x 19"W x 5"H

Net Weight: 27 lb net

Fuses

In addition to an ac mains fuse (F3) located in the IEC inlet socket,

the MET1 has individual fuses located on the main pc board

protecting each of its two power transformers (one for the tube

circuitry, one for the control circuits). A failure of any of these fuses

is a symptom of a more serious problem, and a competent service

technician should be consulted. In no event should these fuses be

replaced with a value or type different than that originally supplied.

The correct fuse values are:

If configured for 100 or 120V:

If configured for 220 or 240V:

1/2 amp, slow blow

1/4 amp, slow blow

T800ma

1/4 amp, slow blow

1/8 amp, slow blow

T400ma

MET1 Owner's Manual