Conrad-Johnson MV100 Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Conrad-Johnson MV100. Conrad-Johnson MV100 14 halaman. Vacuum tube amplifier

INSTALLATION

Because of the number and type of vacuum tubes, the MV100 dissipates considerable heat (approxi-

mately 250 watts at idle). It is essential, therefore, that proper attention be paid to ventilation. The unit

should be mounted horizontally on a flat hard surface so that the ventilation holes in the bottom are

unobstructed. At least eight inches of clearance should be provided above the unit, and at least four

inches on the sides. The cabinet or shelf should be open at both front and back. For more restricted

installations, cooling fans are essential.

The front panel of the MV100 will fit in a standard 19" equipment rack and is designed to carry t he weight

of the unit so that it may be rack mounted. Again, it is important that adequate clearance be provided

above so that ventilation is not impeded. About eight inches of the front of the rack should be left open

above the unit.

To minimize hum pickup, keep the unit well away from the preamplifier and turntable and route power

cords away from input cables.

THE MV100 IS TO BE OPERATED ONLY ON AC LINE VOLTAGE OF 108 TO 125 VOLTS.

The MV100 is available wired for 100 volt, 120V, 220V or 240 volt, 50/60 Hz current.

MV100 Owner's Manual