AudioMX HG-21B Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headphone AudioMX HG-21B. AudioMX HG-21B 8 halaman. Digital over-ear headphones

Product Profile

Transmitter

1. Charging LED (CHARGE)

2. Operating LED (POWER)

3. Charging pins

4. Signal strength setting

5. RCA audio in jack

6. On / Off switch

7. DC in jack

Headphones

8. Charging contacts

9. Battery compartment

10. Volume + / Volume-

11. Operating signal LED

12. Power button

13. Direct line-in

Accessories

14. RCA to 3.5 mm cable

15. 3.5 mm to 3.5 mm Direct Line-in cable

16. Mains adapter

17. 3.5 mm to 6.3 mm jack adaptor

18. Micro AAA / HR03 batteries for headphones

19. 3.5 mm to RCA adapter (Short "Y" shaped cable)

Transmitter installation

1. Connect the supplied mains adapter into the mains socket.

2. Plug the mains adaptor into the DC in jack located on the rear of the transmitter. Slide the

power switch to "ON". The LED indicator on the transmitter starts to flash in blue for about

5 seconds then light up steadily.

3. Connect the transmitter to an audio source with the included RCA to 3.5 mm cable. The

rear of the transmitter has audio sockets with Left and Right for connecting the RCA

cable to the audio output jack of TV, DVD, VCD, VCR, Hi-Fi, CD / MP3 / VCD / DVD players,

iPod, MP3 and more audio sources. Be sure to match red to red and white to white.

4. For TV / DVD / VCD / VCR / Hi-Fi, switch to "-8 dB". For portable devices like CD / MP3 /

VCD / DVD players, and iPod, switch to "0 dB".

Notes:

1. Use only the supplied mains adapter. The mains adapter may only be used in dry rooms.

2. If the desired audio source only has a 6.3 mm jack, connect the RCA audio cable with the

supplied 3.5 mm to 6.3 mm jack adaptor first.