Casit EQSER30E Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Unit Kontrol Casit EQSER30E. Casit EQSER30E 10 halaman.

Halaman Cetak
Stab.: Strada Pietra Alta 1 – C.a.p. 10040 CASELETTE (TO) Italy
Tel. 011/9688230 - 9688170 Fax 011/9688363 –
Partita IVA 0050659.001.7
ISO 9001:2000
Reg. Trib. Torino N.654/62 - C.C.I.A.A. 333122 - M: T0024777
Cert. n. 3614/1
Sito
Quality System Certified
Cancelli Automatici
1.
Product definition
Control unit for controlling 1 motor to be used for moving rolling gates, with maximum power of 500W.
The EQSER30E version control unit is equipped with 433.920 MHZ radio receiver and an EEPROM memory with a 50-user capacity, and is able to operate
with all transmitters in the Multipass, Multipass Roll and Easyroll families at 433.920 MHz. The EQSER30 version is equipped with 40.685 MHZ radio receiver,
and is able to operate with all transmitters in the Multipass family at 40.685 MHz. The EQSER30P version is not equipped with radio receiver and can
therefore only receive contact commands in the terminal board.
2.
Technical specifications
Power supply
230VAC
Motor output
230VAC, Max 500W
Radio receiver
433.920 MHz (EQSER30E)/ 40.685 MHz (EQSER30)
Memory capacity
50 users (EQSER30E and EQSER30)
Safety devices
Photocell
Inputs
OPEN contact, STOP contact, opening limit switch, closure limit switch
Outputs
Courtesy light and autonomous flashing light (max 500W), accessories power supply (24VDC, max 90mA)
3.
Connections
M
4.
Operation
The 4 dip-switches are used to set the operating mode and the radio channel enabled. The control unit should be reset after changing the position of the dip
switches
4.1
Setting the mode
Dip 1
Dip 2
ON
ON
ON
OFF
OFF
ON
OFF
OFF
4.2
Setting the radio channel enabled (only for EQSER30E and EQSER30)
Dip 3
Dip 4
ON
ON
ON
OFF
OFF
ON
OFF
OFF
Pagina 3 di 10
www.casit.it
Shed
MODE
STEP-BY-STEP
AUTOMATIC
SEMIAUTOMATIC CL.
SEMIAUTOMATIC OP.
CHANNEL ENABLED
CH 1
CH 2
CH 3
CH 4
E-Mail
Infissi Telecomandati
GB
230VAC
230Vac power supply
OP
MOTOR – OPEN terminal
COM
MOTOR – COMMON
CL
MOTOR – CLOSE terminal
COM
Courtesy light/flashing light
common
LAMP
Courtesy light/flashing light output
COM
Photocell contact common
+V
24Vdc photocell power supply
PHO
Photocell input
OP
OPEN command input
COM
Limit switch common and OPEN
and STOP commands
STP
STOP command input
FOP
Opening limit switch input
FCL
Closure limit switch input
MOD
CH
ON
1
2
3
4
Rev. 01 del 06/10/2008