audiophony Combo 60 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat audiophony Combo 60. audiophony Combo 60 12 halaman.

Halaman Cetak
AUDIOPHONY PUBLIC ADDRESS
4.2 Rear panel
AC 230V - 50Hz
2
FUSE : 1,6A - 250V
5 x 20 mm
[1] Power socket
Connector to be used with the supplied power
cord. Please only use the supplied power cord or
equivalent.
[2] Fuse compartment
If need to change the fuse, replace it with one with
the exact same characteristics.
[3] Priority terminal
Connect here the microphone or tele-paging
device you want to give priority to. In this case,
other sources will be dimmed while you are using
the mic or the tele-paging.
[4] Loudspeakers terminal
Connect your speakers here as follows:
- When using 100V speakers, connect the com
to the COM connector and the positive to the
connector corresponding to the chosen zone.
When using a multi-zone system, connect all the
coms to the COM connector. The total power
of the speakers must not exceed the maximum
power of the amplifier.
- When using 16 to 4 Ohms speakers (or a set
of speakers), plug the GND connector and the
+ to the 4 Ohms connector. In this case, the
total power of the speakers must be identical
to the amplifier power (+/- 10%) and the total
impedance must be below 4 Ohms.
WARNING: Dangerous output voltage (100V )
Please use electric cables compliant with the
current safety regulations.
[5] AUX input
Connect to this unbalanced line level RCA socket
(-10dB) your CD or MP3 player, etc.
1
SPEAKER OUT
PRIORITY
COM
3
LINE IN
L
100V
R
AUX
CD
4
5
6
[6] CD input
Connect to this unbalanced line level RCA socket
(-10dB) your CD or MP3 player, etc.
[7] AUX/CD-MP3-Tuner selector
Allows you to choose between the AUX and CD
inputs. The selected source will be the only one
accessible from the SOURCE menu. Selecting the
AUX input will cancel the use of the internal media
player.
[8] MUSIC ON HOLD volume button
Allows you to adjust the MUSIC ON HOLD volume
settings.
[9] Mic input
This unbalanced Jack 6.35 input allows you to
connect a microphone.
[10] Music on Hold output
Allows you to choose the music on hold used
by the COMBO60 when used with a telephone
terminal equipment.
[11] Tele-paging input
Connect here your tele-paging system (remote
messaging).
[12] Tele-paging gain control
Allows you to adjust the volume of the tele-paging.
[13] FM Antenna
Connect your FM antenna here.
[14] AM Antenna
Connect your AM antenna here.
13
14
TUNER
AM EXT
COAXIAL
AM LOOP
MUSIC ON HOLD
G C H
VOLUME
TELE-PAGING
MIC
UNBA-
GAIN
1
2
3
4
CD/MP3
LANCED
AUX
TUNER
BALANCED
9
7
11 12
8
10
ENGLISH
Page 7