Danor LP-300 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pencahayaan Danor LP-300. Danor LP-300 11 halaman. 18*12w led par waterproof

GENERAL INTRODUCTION

Please read and understand the instructions in this manual carefully and thoroughly

before attempting to operate this device. These instructions contain important safety and

use information.

This LP-300 shall be an IP-65 rated PAR color changer with (18) 12W 4-IN-1 RGBW LEDs.

shall operate flicker-free with an average LED life of 100,000 hours. And shall be capable of

emitting 3,950 Lux @ 3m. It shall include color and chase macros and have 25° beam and

45° field angles. The LP-300shall house an electronic strobe and be capable of 0-100%

dimming with variable dimming curve modes. The LP-300 shall operate via DMX and RDM

and include a 4- button control panel display. Exterior construction shall be of die-cast

aluminum and the LP-300 shall contain a dual yoke / floor stand. Max power consumption

shall be 220W and a multi-voltage universal auto switching power supply (110-250v) shall

be included. It shall measure 365mm x 157mm x 365mm (LxWxH) and weigh 8.1 kg.

Please note that although this fixture is IP rated, the fixture is not suitable for marine/or

coastal environment installations. Installing this fixture in a marine and/or coastal

environment may cause corrosion and/or excessive wear to the interior and/or exterior

components of the fixture. Damages and/or performance issues resulting from installation

in a marine and/ or coastal environment will void the manufacturers warranty and will not

be subject to any warranty claims and/or repairs.

UNPACKING

Every device has been thoroughly tested and has been shipped in perfect operating

condition.

Carefully check the shipping carton for damage that may have occurred during shipping. If

the carton is damaged, carefully inspect the device for damage, and be sure all accessories

necessary to install and operate the device have arrived intact. In the event damage has

been found or parts are missing, please contact our customer support team for further

instructions.