audiophony RACER 250 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembicara audiophony RACER 250. audiophony RACER 250 14 halaman.

250W

RACER250 -

portable sound system With bluetooth

4 - 4 : Master section

1 - Mains plug.

Please plug in your power cord to recharge the

batteries and/or use your device.

2 - Fuse holder.

Please replace the fuse with an identical model

only. Fuse T3.15AL 250V.

3 - ON-OFF-CHARGE switch.

- In the ON position: The RACER250 is powered

on.

- In the OFF position: The RACER250 is off.

- In the CHARGE position: The RACER250

batteries are charging. The BATTERY CONNECT

switch must be in the ON position for charging to

take place.

4 - BATTERY CONNECT switch.

Disconnects the battery when the RACER250 is

not used for a long time.

This saves the batteries life.

The switch is set to OFF on delivery.

5 - Battery level indicators.

It is imperative to charge the batteries when only the LOW light is on.

The CHARGE indicator of the batteries lights up green when the batteries are charged.

tWs

multimedia player and optional uhf microphones

1 - MASTER volume control.

This control affects the overall output volume of the system.

2 - POWER/LIMIT light. Indicates whether the system is powered

and whether the limiter is active.

When the light is blue, the system is powered up.

When the light is flashing red, it means that the power limiter

protection system is active. Please lower the input level of your

sources and/or the master.

3 - Potentiometer for adjusting the treble level.

From -12 dB to +12 dB clockwise. This adjustment affects the

output of the master.

4 - Potentiometer for adjusting the bass level.

From -12 dB to +12 dB clockwise. This adjustment affects the

output of the master.

5 - MIC EFFECT: Potentiometer to adjust the level of the effect

applied to the microphone channels.

English