audiophony GOA Series Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Pembicara audiophony GOA Series. audiophony GOA Series 14 halaman.

Halaman Cetak

MOJO500Line - Amplified system with subwoofer and column + Bluetooth

Power switch

2 - Fuse

Protects the power supply module and the built-in amplifier.

If need to replace the fuse, please make sure the new fuse has exactly the same characteristics.

3- Power input socket

Allows you to connect the speaker to an electrical outlet. Use the supplied IEC cord, and make sure the voltage

delivered by the outlet is in adequation with the value indicated by the voltage selector before turning on the built-in

amplifier.

4- Balanced line output

Output for link another system. The level is line and signal is master mixed.

5- Low equalizer

Allows you to equalize (+/- 15dB) the master Low signal.

6- High equalizer

Allows you to equalize (+/- 15dB) the master high signal.

7 - ON/LIMIT signal indicator

Allows you to check on the volumes

(PLEASE MAKE SURE EACH CHANNEL IS CONFIGURED IN ORDER TO PREVENT THIS INDICATOR FROM BEING

LIT).

Channels sound level

Allows you to adjust the sound level of each channel.

This setting also affects the main volume level of the amplification system.

(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT).

9 - Channels 1 to 3 input selector

Allows you to choose the type of source connected to each channel.

10 - Input connectors

CH1 and CH2 input via balanced COMBO

Connect here an XLR or JACK plug from a line level music instrument or a microphone. The signal of this mono input

is spread across the right and left output of the system.

CH3 inputs via RCA, stereo 3,5 Jack and Bluetooth

Connect a line level instrument via the RCA. The AUX input allows you to connect via stereo Jack 3.5 any extra line

level source as external player. The Bluetooth

11 Bluetooth

pairing :

The "Pair" LED is blinking quickly in green to indicate that its searching a Bluetooth

On your smartphone or computer select the "MOJO500Line" in the list of the Bluetooth

The "Pair" LED must remain ON in green and a sound signal indicate that your device is connected.

The "Pair" knob can be use now to Play/pause your mp3 files.

Important : You can only connect one Bluetooth

the devices that you don't want to use. The last device get priority connexion.

Please make sure to properly configure the sound levels of your system. In addition to being unpleasant for

the audience, improper settings can damage your whole sound system.

The "LIMIT" indicators will light on when the maximum level is reached and must never be permanently lit.

CAUTION

Beyond this maximul level, the volume will not increase but will be distorted.

Moreover, your system can be destroyed by an excessive sound level despite of the internal electronic protections.

First, in order to prevent that, adjust the sound level via the Level of each channel.

Then, use the High/Low equalizer to adjust the acoustic as you wish.

If the sound output does not seem powerful enough, we strongly recommend to multiply the number of systems in

order to spread the sound output evenly.

receiver is also on this channel.

device on the MOJO500Line in the same time. You must disconnect

connexion.

devices to connect it.

English

Page 11