audiophony MOJO500Liberty Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Subwoofer audiophony MOJO500Liberty. audiophony MOJO500Liberty 8 halaman.

Halaman Cetak

MOJO500Liberty - Active battery system - Subwoofer and column with Bluetooth

1- Power input socket

Allows you to connect the speaker to an electrical outlet. Use the supplied IEC cord, and make sure the voltage

delivered by the outlet is in adequation with the value indicated by the voltage selector before turning on the built-in

amplifier.

2 - Fuse

Protects the power supply module and the built-in amplifier.

If need to replace the fuse, please make sure the new fuse has exactly the same characteristics.

3 - Power switch

4 - Balanced line output

Output for link another system. The level is line and signal is master mixed.

5 - Input connectors

CH1 and CH2 input via balanced COMBO

Connect here an XLR or JACK plug from a line level music instrument, a microphone or a guitar. The signal of this

mono input is spread across the right and left output of the system.

CH3/4 and CH5/6 inputs on 6.35 mono jack

On these entries you can either:

- Connecting line level devices

- Connect guitars if the CH3-6 Hz button (15) is pressed.

CH7/8 inputs via RCA, stereo 3,5 Jack and Bluetooth

Connect a line level instrument via the RCA. The AUX input allows you to connect via stereo Jack 3.5 any extra line

level source as external player. The Bluetooth

6 - Channels 1 and 2 input selector

Allows you to choose the type of source connected to each channel.

Channels sound level

Allows you to adjust the sound level of each channel.

This setting also affects the main volume level of the amplification system.

(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT).

8 - Reverb level adjustment for channels 1 to 6

9 - Assignment of the reverb to channels 1 to 6

10 - Low equalizer

Allows you to equalize (+/- 15dB) the channels 1 to 6 Low signal.

11 - High equalizer

Allows you to equalize (+/- 15dB) the channels 1 to 6 Low signal.

12 - Aux/Bt selector

This switch allows you to select either Bluetooth or Aux and RCA inputs to assign to channels 7 and 8.

13 - ON/LIMIT signal indicator

Allows you to check on the volumes

(PLEASE MAKE SURE EACH CHANNEL IS CONFIGURED IN ORDER TO PREVENT THIS INDICATOR FROM BEING

LIT).

Please make sure to properly configure the sound levels of your system. In addition to being unpleasant

for the audience, improper settings can damage your whole sound system.

The "LIMIT" indicators will light on when the maximum level is reached and must never be permanently

CAUTION

lit.

Beyond this maximul level, the volume will not increase but will be distorted.

Moreover, your system can be destroyed by an excessive sound level despite of the internal electronic protections.

First, in order to prevent that, adjust the sound level via the Level of each channel.

Then, use the High/Low equalizer to adjust the acoustic as you wish.

If the sound output does not seem powerful enough, we strongly recommend to multiply the number of systems in

order to spread the sound output evenly.

receiver is also on this channel.

and Reverbe

English

Page 5