CASO DESIGN 11862 Panduan Pengoperasian Asli - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengoperasian Asli untuk Dispenser Air CASO DESIGN 11862. CASO DESIGN 11862 16 halaman. Instant boiling water dispenser

Halaman Cetak

•

Before connecting the device, compare the connection data (voltage and

frequency) on the rating plate with those of your electrical network. This data must agree in

order that no damages occur in the device. If in doubt, ask your qualified electrician.

•

The electrical outlet must be protected by a 16A safety cut-out switch.

•

Make sure that the power cable is undamaged and has not been installed

under the ice maker or over hot or sharp surfaces.

•

The electrical safety of the device is only guaranteed if the device is connected

to a properly installed protective conductor system. Operations using an electrical outlet

without a protective conductor are prohibited. If in doubt, have the house installation

checked over by a qualified electrician.

The manufacturer cannot be made responsible for damages that are caused by a missing

or damaged protective conductor.

3.7 Overheating protection & reset

The appliance is equipped with an overheating protection

facility. If the temperature of the appliance exceeds the

critical limit the appliance shuts off further power supply for

Please use enclosed reset-key for the reset-button.

4 Design and Function

In this chapter, you'll find important information on the design and function of the device.

4.1 Overview

Warning

► Warning symbol: hot steam.

► Caution hot steam can escape at device. Risk of burns.

safety reasons.

Remove the water tank. You can

see the reset button.

By pressing the reset button (1)

the appliance can be reactivated.

Unplug the device before reset.

When the device is only producing

cold water please press reset

button.