Consonance Droplet CDP5.0 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemutar CD Consonance Droplet CDP5.0. Consonance Droplet CDP5.0 8 halaman. Droplet high-end cd player
Halaman CetakRepeat CD
To repeat the complete CD, press the repeat button once. "RE P cd" will be displayed for two seconds in the
display, and will be repeated for two seconds every ten seconds to show that the repeat CD mode has been
selected. To cancel "repeat CD", push the repeat button on the remote control two times.
Repeat track
To repeat the track playing, press the repeat button twice. "RE P tr" will be displayed for two seconds in the
display, and will be repeated for two seconds every ten seconds to show that the repeat track mode has
been selected. To cancel "repeat track", push the repeat button on the remote control one time.
From left to right the connectors are :
AC Power connection 240V / 230V / 220V / 115V / 100V AC dependent on country.
Digital output Phono/RCA
Balanced signal outputs XLR right/left
Unbalanced outputs Phono/RCA right/left
We recommend to connect signal cables to the CD-player when the CD-player and all the other units of the
audio system is switched off.
The CD-player has two types of analog audio outputs: unbalanced audio signal with RCA plugs (phono plugs)
and true balanced audio signal with XLR plugs (pin 2 is positive phase, pin 3 is negative phase and pin 1 is
chassis earth).
We will recommend using the balanced XLR outputs from the CD-player, as these will have the absolute
highest level of sound quality.
The CD-player has got one RCA standard SPDIF digital audio output. Digital signal level is 0.5Vpp when
terminated in 75 ohm load. This is the standard load impedance of external DAC's and other recording
equipment.
CONSONANCE REMOTE CONTROL
5