Consonance Droplet LP5.0 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Meja putar Consonance Droplet LP5.0. Consonance Droplet LP5.0 7 halaman.
Juga untuk Consonance Droplet LP5.0: Panduan Pengguna (7 halaman)
Halaman Cetak
Assembling the Turntable
1.Open the box and take out the main turntable base. Remove the protective covering of the bearing shaft and ensure it is totally
clean using a lint free cloth.
2.Fix the tone-arm base with height on the main turntable base.
3.Using the supplied syringe put a few drops of oil into the hollow at
the top of the bearing shaft, and if needed, dropping the oil slide
down onto the internal surface of bearing housing. Place the ball bearing into this hollow and put one drop of oil on its top. Gently
rotate the ball using your finger to ensure it is covered with a thin film of oil.
4.Put the bearing housing very gently down over the shaft taking care not to displace the ball. It will be a very tight fit but once
engaged it can drop suddenly - lower the bearing housing carefully by hand to prevent this. Now spin the bearing to ensure it runs
smoothly.