Consort DF2SL heatflow Panduan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pemanas Consort DF2SL heatflow. Consort DF2SL heatflow 7 halaman.
Juga untuk Consort DF2SL heatflow: Petunjuk Pemasangan & Pengoperasian (2 halaman)
Halaman Cetak
D F 2 S L H E A T F L O W : I N S T A L L A T I O N G U I D E
(11)
Step 11: Feed the stripped end through the back of the
heater.
(13)
Step 13: Check connections, un-pack cable clamp and
two screws from the screw pack.
(15)
Step 15: Place the heater on the two screws using the
key hole slots.
4
(12)
Step 12: Connect the line and neutral conductors to the
terminal block in the heater marked L & N (This heater is
double insulated and does not require earth).
(14)
Step 14: Clamp the cable.
(16)
Step 16: Fix top screw ensuring not to clamp the mains cable.
Do not over tighten as the screw can pull through the plastic.