Beldray EH0397 PTC Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanas Beldray EH0397 PTC. Beldray EH0397 PTC 7 halaman.

Instructions for Use

Fan Only Function

Turn the control dial to 'Fan'.

Turn the thermostat dial gradually clockwise and the fan will start blowing.

Heating Function

Turn the control dial to 'I' for low heat and 'II' for high heat.

Set the level of heat by turning the thermostat dial clockwise.

The thermostat will turn the heater off when the selected temperature is reached and will

automatically turn back on when the temperature drops.

For maximum heat output use the 'II' setting with the thermostat turned fully clockwise.

Overheating

The thermostat will automatically turn the heater off if it overheats.

Overheating can be caused by obstruction to the air intake on the back of the heater or the grille on

the front. If this occurs, unplug the heater from the mains power supply and allow it to cool for 30

minutes. Remove any obstructions before turning the heater back on.

If the heater ceases to function, check the fuse and replace with the correct rated fuse.

Always disconnect the heater from the mains power supply and allow it to cool before cleaning.

Clean the heater with a soft, damp, lint-free cloth; allow it to dry thoroughly before the next use.

Do not immerse the heater in water or any other liquid.

THE SCIENCE

BEHIND HEAT

EH0397 PTC Ceramic Heater