Addonics Technologies Saturn Cipher ExDrive SCEDIS128 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Addonics Technologies Saturn Cipher ExDrive SCEDIS128. Addonics Technologies Saturn Cipher ExDrive SCEDIS128 18 halaman. Saturn cipherexdrive (sced)

Halaman Cetak
5. Insert the driver diskette in "A" drive and follow the instruction on the
screen to load "Addonics CardBus IDE Controller". Follow wizard
and point to the location of the driver. (Follow the steps from the
Driver Disc to where you saved the driver files)
6. When installation is finished, a PCMCIA card icon will appear in the
lower right-hand of the Window's system tray.
7. Double Click on the "My Computer" icon. You are now ready to use
the Saturn Cipher ExDrive kit.
Note:
Brand New Hard drive must be Partitioned and Formatted first.
PCMCIA Installation for Windows NT
1. Go to Start\Settings\Control Panel
2. Double Click SCSI adapter icon
3. Click on the Driver Tab
4. Click Add to add new driver
5. Follow wizard and point to the location of the driver. (Follow the
steps from the Driver Disc to where you saved the driver files)
6. Select "Addonics PCMCIA..." then click ok.
7. Windows will prompt you for driver location again, to continue
Type in A:\NT then click continues.
8. Click YES to restart your computer.
9
. Double Click on the "My Computer" icon. You are now ready to use
the Saturn Cipher ExDrive kit.
Note: You must use the PCMCIA mode for Windows NT.
CardBus/PCMCIA Installation for Windows 2000
1. Make sure your computer is up and running
2. Verify that all cables are connected and there is power to the drive.
3. Insert the PCMCIA cable to the PCMCIA socket.
4. A "New Hardware Found" message shall pops up.
5. Select "Next" to continue installation.
6. Select "Search for a suitable driver...." button and select "Next".
7. In "select a Device Driver page", select "Have Disk" to specify
location. Follow wizard and point to the location of the driver.
(Follow the steps from the Driver Disc to where you saved the driver
files) Select "Addonics CardBus...." click YES for the Windows
warning message and let Win2000 to finish the Installation and
that's it.
8. Double Click on the "My Computer" icon. You are now ready to use
the Saturn Cipher ExDrive.
Addonics Technologies
Saturn Cipher ExDrive User Guide
15