Dantel 46022-20 Panduan Pemasangan & Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Sistem Keamanan Dantel 46022-20. Dantel 46022-20 8 halaman. Multiple alarm combiner
Halaman Cetak
F
. 2 - S
L
, 46022-20 M
IG
TRAP
OCATIONS
M
M
OUNTING THE
ODULE
P
4
AGE
INSTALLATION
• Make sure each connector pin goes straight into its socket.
• Make sure the subassembly fits closely on the standoffs.
• Make sure the panel is straight in the opening.
♦
Replace the three screws in the standoffs.
♦
Refer to the subassembly practice for strapping information.
♦
Attach the barcode label for the subassembly to the module
handle.
A
C
ULTIPLE
LARM
OMBINER
OUT
OUT
OUT
OUT
13
1
J5
J4
SUBASSEMBLY
MOUNTING
AREA
The 56-pin edge connector is normally prewired at the factory.
If you are going to wire the connector, refer to Fig. 3 for module
connector pin wiring assignments. Wire the connector in the
shelf or housing as required.
Slide the module into the equipment housing.
IN
DSR
IN
DCD
IN
RXD
IN
CTS
8
1
J1
1
MODULE/
SUBASS'Y
4
POWER SUPPLY
46022-20-0398 <90-00066>