AudioPressBox APB-112 OW-D Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat AudioPressBox APB-112 OW-D. AudioPressBox APB-112 OW-D 11 halaman. Press conference audio distribution amplifier

Halaman Cetak

Operations

Connect the APB to Dante network

with PoE capability

APB-112 OW-D is a PoE Class 3 device, so it

can be powered from a basic PoE

Make the Dante signal routing

APB is set by default to obtain IP

address from DHCP server.

In Dante network you will see the APB as:

APB112OW-D-serialnumber. You can change it

in Dante controller software. In this software

you can also route the signal to APB

For more information about Dante controller set up click on the following link:

www.audiopressbox.com/manuals/APB-112-OW-D

Set up the levels

Set up the output level on your source device

to reach the nominal output on APB – 0dB LED

on Output Level indicator. You can also set the

output level switch for each output as desired

– Mic or Line

APB is ready to use!