Dantherm CDF 40 Petunjuk Kit Servis - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Kit Servis untuk Dehumidifier Dantherm CDF 40. Dantherm CDF 40 12 halaman. Replacing rh/t sensor
Juga untuk Dantherm CDF 40: Instalasi Cepat (12 halaman), Manual (6 halaman)

Halaman Cetak

Unpack the unit and remove the front.

Remove the PPI filter and replace with new as

per partslist.

The new PPI filter must be right up against both

ends of the cabinet.

Make sure that the hole is furthest away from the

front as shown.

Note: For CDP/CDF 40 and 50 the filters

must be cut according to this illustra-

tion.

Make sure there is a bracket on the condenser

coil.

If not, mount the small aluminium bracket and

the

white plastic copper tube holder.

The bracket must be fixed onto the side panel

with the self-tapping screws.

Fix the capacitor with a cable tie strip as shown.

Instructions

200mm

130mm

0mm

1237mm

1447mm