Constellation audio PERSEUS Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Constellation audio PERSEUS. Constellation audio PERSEUS 19 halaman.

most preamps. For example, the left-channel connection for MM is on the right side of the back panel, and

the right-channel connection is on the left side. Connecting the cables in the usual side-by-side fashion will

result in an incorrect installation and the mixing of sounds from different source devices.

5. XLR output

The inner XLR connections on the rear of the Perseus are outputs. To remove an XLR plug, push on the tab on

the connector body and pull the plug out. Be sure to match the output to the correct channel on your preamp.

As you are looking at the back of the Perseus, the output on the left side is for the right channel, the output

on the right is for the left channel.

6. RCA output

RCA unbalanced outputs are also supplied for preamplifers not equipped with XLR connections. When

connecting to an amplifier, be sure to match the output to the correct channel on your amp. As you are

looking at the back of the Perseus, the output on the left side is for the right channel, and the output on the

right is for the left channel. To remove an RCA plug, grasp it by the connector body and pull the plug out.