Abus WIRELESS ALARM SYSTEM Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Keamanan Abus WIRELESS ALARM SYSTEM. Abus WIRELESS ALARM SYSTEM 14 halaman.
Halaman Cetak
After changing the configuration settings, go to the Client information window and select Loca for a direct USB connection or Remote
for modem connection.
If you select Local, you can start programming the equipment.
If you select Remote, you first have to connect to the client. To do this, select the Comm dropdown menu.
Chapter 6 Panel status
Select End-user -> Status -> Status Display to obtain the following overview of your wireless alarm system.
Under Zones, you see
an overview of all
zones. Green: not
monitored
Red: monitored
Grey: bypassed
Freeze: Freezes the
current screen display.
No sound: Disables sound
signals.
Save: Saves the current
screen.
Select Upload all to
transfer data from
the client to the PC.
Select Download all
to transfer data from
the PC to the client.
Select Dial to panel
to establish a remote
connection.
Select a zone with the
mouse and click this
button to bypass or
include the zone.
Press this button to
synchronise the panel
time with the PC system
time.
Under Trouble, you see an
overview of all possible
faults.
Select Arm or Disarm to
arm or disarm the system.
A green bar shows that a
connection exists.
A red bar shows that no
connection exists.
The Accessory field
gives you an overview
of the state of
connected accessories.
6-7