Cast LAVA Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor kayu Cast LAVA. Cast LAVA 20 halaman.

adjusted.

The stove can be attached from the back or through the heating plate.

10.2 PRIMARY air control

With the regulator on the stove door, the passage of air through the ash drawer and the grate in the fuel

direction is adjusted. The primary air is necessary for the combustion process. The ash drawer must be

regularly emptied, so that the ash does not obstruct the primary air entry. Through the primary air fire is

also kept alive.

During wood combustion, the register of primary air must be opened only if necessary (lighting, increasing

the burning intensity), because otherwise the wood burns fast and the stove may overheat. The regulator

operation is shown in the picture.

10.3 SECONDARY air control

Over the door of the hearth there is the secondary air control, which, moved in horizontal direction,

regulates secondary air. When the valve is open (the handle moved to the right) it enables a better wood

combustion. Through this regulator, it is possible to adjust the desired combustion course of the stove.

Leaving the regulator slightly open during the stove operation keeps the glass clean.

11. INSTALLATION

The stove must be connected with a junction to the adequate flue. The junction must be, if possible, short,

straight, or positioned a little uphill. The connections must be tight. It is obligatory to respect the National

and European rules, local regulations concerning building matter and also fire protection rules. Please

apply to your chimney sweeper for all information.