Addonics Technologies CFASTD5 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Duplikator Disk Addonics Technologies CFASTD5. Addonics Technologies CFASTD5 17 halaman.

Addonics Technologies CFASTD5 Panduan Pengguna

Load Default

Press ESC to return to the main menu then use the ENT butt on to select. This function resets all
settings to their factory default. This function helps th e system recover from errors caused by an
illegal operati o n.
Press ENT to enter the following screen. Use the Up and Down bu tt ons to confi
defaults.
If Load Default OK, this will be displayed on the LCD as shown below.
Copy HPA
If this function is set to "ON", the system will completely copy the data in a source HDD's host
protected area.
The default is "OFF" . Use the ENT, Up and Down buttons to change this to "On".
Burn In
This function is used to burn test the system reliability.
Press ENT to enter the following screen.
Use the Up and Down buttons to choose Compare, Async Copy & Cmp and Async Compare, then
press ENT to confirm.
www.addonics.com
11-07.Adv Setup
Load Default
Load Default
Confi
Load Default
Ok
11-08. Adv Setup
Copy HPA
11-09. Adv Setup
Burn In
Burn In Mode
Copy & Compare
Technical Support (M-F 8:30am - 6:00pm PST)
t to factory
Phone: 408-453-6212
Email: www.addonics.com/support/query/